Nokia IP1220 Installation Guide - Page 61

Two-Port and Four-Port Copper Gigabit Ethernet NICs Copper Gigabit Ethernet NIC Features The copper Gigabit Ethernet NIC supports: „ High bandwidth „ Full-duplex mode operation up to 1 Gbps „ Link speed auto advertising (10/100/1000) „ Hot swapping „ PCI operation at 33 MHz, 66 MHz, and 100 Mhz „ Compliance with IEEE 802.3z and 802.3ab Gigabit Ethernet specifications You can configure and monitor Gigabit Ethernet NIC interfaces with Nokia Network Voyager. Specifically, you can use Network Voyager to set the port speed and full-duplex mode to 1000, 100, or 10 Mbps. For information about how to access Network Voyager and the related reference materials, see "Using Nokia Network Voyager" on page 44. Figure 15 shows the front panel details for the PMC two-port copper Gigabit Ethernet NIC you can use in Nokia IP1200 Series appliances. Figure 15 Two-Port Copper Gigabit Ethernet NIC Front Panel Details Link LEDs (green or yellow) Activity LEDs (yellow) 1000BaseT V2 LINK ACT LINK ACT Ports 00386.5 Figure 16 shows the front panel details for the PMC four-port copper Gigabit Ethernet NIC you can use in Nokia IP1200 Series appliances. Figure 16 Four-Port Copper Gigabit Ethernet NIC Front Panel Details 1 2 3 1 2 3 4 Link LEDs (solid green) Activity LEDs (blinking green) 1000 BaseT Ports 4 00641 IP1220 and IP1260 Security Platforms Installation Guide 61