Nokia IP1220 Installation Guide - Page 54
formerly occupied by the NIC., If you are not replacing a NIC you are removing
View all Nokia IP1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
4 Installing and Replacing Network Interface Cards and Accelerated Data Path (ADP) Services Modules 11. Insert the new NIC or a blank bezel by doing one of the following: a. Insert the NIC front bezel into the PMC carrier and gently push the back of the NIC down toward the chassis tray assembly. Make sure that the NIC edge is completely seated into the connectors on the chassis tray assembly. 00314 b. If you are not replacing a NIC you are removing, insert a blank bezel into the location formerly occupied by the NIC. Make sure that the bezel is completely seated onto the slot on the front of the PMC carrier and that the screw holes on the bottom of the bezel align with those on the bottom of the PMC carrier. Proceed to step 13. Note To reduce electromagnetic interference (EMI), a blank bezel needs to be installed in the place of any NIC you have removed. 54 IP1220 and IP1260 Security Platforms Installation Guide