Nokia IP1220 Installation Guide - Page 25
Power Supplies and Fan Unit, IP1220 and IP1260 Security Platforms Installation Guide, Caution, Table 7
View all Nokia IP1220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Nokia IP1200 Series Security Platform Overview Caution To avoid damage to the ejector and locking lever, loosen the two retaining screws before you remove the hard-disk drive. Once screw is located behind the ejector and locking lever, and the other screw is on the opposite side. Table 7 Hard-Disk Drive LEDs LED LED State Activity Off Blinking green Status Solid red Solid green Off Blinking green Meaning No current disk activity. Current disk activity. hard-disk drive is turned on but is malfunctioning. hard-disk drive is turned on and is functioning. One of the following: • hard-disk drive failed its test and was powered off. • hard-disk drive is ready to be removed using the hot swap feature. One of the following: • System is booting. • hard-disk drive is starting up. • System is testing the hard-disk drive. Note Do not remove the hard-disk drive if the Status LED is blinking green. Power Supplies and Fan Unit The power supplies and fan unit are located at the rear of the IP1200 Series appliance, as shown in Figure 6. IP1220 and IP1260 Security Platforms Installation Guide 25