Oki ML490 Maintenance Manual - Page 52
Press the FF/LOAD switch.
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
;;;(2) When using the continouos paper 1) Set the change lever either to the rear side or the bottom side position. (See Figure 2-13.) 2) Set a sheet of paper either to the push tractor. 3) Press the "FF/LOAD" switch. 4) The LF motor starts its operation to feed the paper up to the print start position. 5) The paper is fed in up to the TOF position (Factory default: 0.85 inches from the top). Push down the "FF/LOAD" switch. Detection of the sheet supplied PE LF action Line feed (about 3 inches) until the detection of the sheet supplied When the ""FF/LOAD" switch is pushed down, the LF motor feeds in the sheet about 3 inches. When the LF motor completes the operation and the sheet has not been fed in, the feeding operating operation becomes, ineffective, thus resulting in the feeding jam. 42114101 Rev.1 52 /