Oki ML490 Maintenance Manual - Page 65
Space Rack
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3.3.8 Space Rack (1) Remove the printhead (see 3.3.1). (2) Remove the upper cover (see 3.3.4 (1) - (5)). (3) Remove the gear case Assy (see 3.3.5). (4) Remove the space motor (see 3.3.7). (5) Remove the spring 1. (6) Disengage the claw on left side of space rack 2 from the frame, and remove the space rack 2 in upper direction. (7) To install, follow the removal steps in the reverse order. Note on installation: (1) After installation, check and adjust the gap between platen and printhead (see 4-1). 1 2 1 2 2 42114101 Rev.1 65 /
42114101
Rev.1
65 /
3.3.8
Space Rack
(1)
Remove the printhead (see 3.3.1).
(2)
Remove the upper cover (see 3.3.4 (1) – (5)).
(3)
Remove the gear case Assy (see 3.3.5).
(4)
Remove the space motor (see 3.3.7).
(5)
Remove the spring
1
.
(6)
Disengage the claw on left side of space rack
2
from the frame, and remove the space
rack
2
in upper direction.
(7)
To install, follow the removal steps in the reverse order.
Note on installation:
(1)
After installation, check and adjust the gap between platen and printhead (see 4-1).
2
2
2
1
1