Oki ML490 Maintenance Manual - Page 75
Remove the FG plate L
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3.3.18 Carriage Shaft (1) Remove the printhead (see 3.3.1). (2) Remove the upper cover (see 3.3.4 (1) - (5)). (3) Remove the driver board (see 3.3.12). Remove the FG plate (L) 2. (4) Slide the carriage shaft 1 to the left side (in the direction of the arrow) to remove. (5) To perform mounting, follow the reverse procedure of removal. Note on installation: (1) After installation, check and adjust the gap between platen and printhead (see 4-1). 1 1 2 42114101 Rev.1 75 /
42114101
Rev.1
75 /
2
1
1
3.3.18 Carriage Shaft
(1)
Remove the printhead (see 3.3.1).
(2)
Remove the upper cover (see 3.3.4 (1) – (5)).
(3)
Remove the driver board (see 3.3.12).
Remove the FG plate (L)
2
.
(4)
Slide the carriage shaft
1
to the left side (in the direction of the arrow) to remove.
(5)
To perform mounting, follow the reverse procedure of removal.
Note on installation:
(1)
After installation, check and adjust the gap between platen and printhead (see 4-1).