Oki ML490 Maintenance Manual - Page 68
Platen Assy
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3.3.11 Platen Assy (1) Remove the printhead (see 3.3.1). (2) Remove the ribbon protector (see 3.3.2). (3) Remove the pull-up roller Assy (see 3.3.3). (4) Remove the upper cover (see 3.3.1 (1) - (5)). (5) Turn the change lever 1 to the bottom position. (6) Push in the lock levers 2 on both sides to unlock from the frame, then rotate them upward by 90°. (7) Remove the platen Assy 4 from base frame. (8) To install, follow the removal steps in the reverse order. 2 4 2 2 1 42114101 Rev.1 68 /
42114101
Rev.1
68 /
3.3.11 Platen Assy
(1)
Remove the printhead (see 3.3.1).
(2)
Remove the ribbon protector (see 3.3.2).
(3)
Remove the pull-up roller Assy (see 3.3.3).
(4)
Remove the upper cover (see 3.3.1 (1) – (5)).
(5)
Turn the change lever
1
to the bottom position.
(6)
Push in the lock levers
2
on both sides to unlock from the frame, then rotate them upward
by 90
°
.
(7)
Remove the platen Assy
4
from base frame.
(8)
To install, follow the removal steps in the reverse order.
2
4
1
2
2