Oki ML490 Maintenance Manual - Page 74
Change Lever and Gears
View all Oki ML490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3.3.17 Change Lever and Gears (1) Remove the upper cover (see 3.3.4 (1) - (5)). (2) Remove the reset spring 1, then remove the idle gear 2, the tractor gear 4 and the change gear 5. (3) Push back the protrusion of the Change Gear Shaft 6 with a flatblade screw driver to remove the change lever 3. (4) To perform mounting, follow the reverse procedure of removal. Remark on assembly: (1) To insert the change lever into the Change Gear Shaft 6, match the flat surface (D cut). 4 3 5 1 6 2 3 42114101 Rev.1 D cut 74 /
42114101
Rev.1
74 /
3.3.17 Change Lever and Gears
(1)
Remove the upper cover (see 3.3.4 (1) – (5)).
(2)
Remove the reset spring
1
, then remove the idle gear
2
, the tractor gear
4
and the change
gear
5
.
(3)
Push back the protrusion of the Change Gear Shaft
6
with a flatblade screw driver to
remove the change lever
3
.
(4)
To perform mounting, follow the reverse procedure of removal.
Remark on assembly:
(1)
To insert the change lever into the Change Gear Shaft
6
, match the flat surface (D
cut).
4
6
3
5
2
1
3
D cut