Pentax OPTIOWP Operation Manual - Page 60

Calling Up a Specific Menu When you assign functions to the Green button, pressing the Green button displays the menus one after another. This is useful for going straight to the setting screens of frequently used functions such as EV Compensation, Sensitivity and White Balance. • The following functions can be assigned to the Green button: Green Mode, Recorded Pixels, Quality Level, White Balance, Focusing Area, Focus Limiter, Sensitivity, EV Compensation, Sharpness, Saturation and Contrast. 3 • The default setting is Green mode in [1] and no function in [2], [3] or [4]. • The setting is returned to the default setting by selecting [Reset] on the [u Setting] menu. • The functions assigned to the Green button can be used in the usual manner on the original menus ([A Rec. Mode] and [u Setting]). • You cannot save different settings for the same function on the Green button and on the original menu. Common Operations Assigning a Function to the Green Button 1 Select [Green Button] on the [u Setting] menu. 2 Press the four-way controller (5). Green Button The Green Button screen appears. 1 Green Mode 3 Use the four-way controller (23) 2 Off 3 Off to choose a number. 4 Off 4 5 6 7 58 MENU Press the four-way controller (5). A pull-down menu appears. Choose a function and press the 4 button. Repeat Steps 3 to 5 to register the necessary functions. Green Button 1 Green Mode 2 Recorded Pixels 3 Quality Level 4 White Balance Focusing Area Focus Limiter MENU Cancel OK OK Press the shutter release button halfway. The setting is saved and the camera returns to capture status.