Pentax W80 Gunmetal Gray Optio W80 - Azure Blue Optio W80 Manual - Page 221

Perform Pixel Mapping Pixel mapping is a function for mapping out and correcting for defective pixels in the CCD sensor. • Pixel Mapping is only available in A mode. Pixel mapping cannot be selected even if the [W Setting] menu is displayed by pressing the 3 button in Q mode. • When executing Pixel Mapping from Q mode, press the Q button once to enter A mode. Then press the 3 button and the fourway controller (5) to display the [W Setting] menu and select Pixel Mapping. • Pixel Mapping cannot be selected in Voice Recording mode. 1 Press the 3 button in A mode, and then press the four-way controller (5) once. The [W Setting] menu appears. 2 Use the four-way controller (23) to select [Pixel Mapping]. 3 Press the four-way controller (5). The [Pixel Mapping] screen appears. 4 Use the four-way controller (2) to Pixel Mapping 7 select [Pixel Mapping]. Checks the image sensor and then adjust 5 Press the 4 button. Defective pixels are mapped and corrected. Pixel Mapping Cancel OK OK When the battery level is low, [Not enough battery power remaining to activate Pixel Mapping] is displayed on the monitor. Use the AC adapter kit K-AC78 (optional) or use a battery with ample capacity remaining. Settings 219