Pentax W80 Gunmetal Gray Optio W80 - Azure Blue Optio W80 Manual - Page 98
Press the shutter release button fully., Set the number of shots.
UPC - 027075154452
View all Pentax W80 Gunmetal Gray manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
Taking Pictures 6 Set the number of shots. 1 Press the four-way controller (5). 2 Use the four-way controller (23) to set [Number of Shots], then press the four-way controller (5). The frame returns to [Number of Shots]. 7 Press the four-way controller (3). The frame moves to [Start Delay]. 8 3 Set the start delay. 1 Press the four-way controller (5). 2 Use the four-way controller (23) to set the hours, then press the four-way controller (5). 3 Use the four-way controller (23) to set the minutes, then press the four-way controller (5). The frame returns to [Start Delay]. 9 Press the 3 button. The [Interval Shoot] settings are saved and the camera returns to capture mode. 10 Press the shutter release button halfway. The focus frame on the display turns green if the subject is in focus. 11 Press the shutter release button fully. Interval shooting starts. The camera turns off between shots (during standby). Press the power switch during standby to display the remaining number of shots and interval on the monitor. The [Stop interval shooting?] message is displayed when the power switch and then the 3 button are pressed during standby. Pressing the 4 button cancels interval shooting. • Interval Shoot is unavailable in b (Auto Picture), 9 (Green), F (Digital Panorama), X (Digital Wide) and O (Voice Recording) modes. • Even if an alarm is set, the alarm will not ring during interval shooting. • Interval Shoot stops if the SD Memory Card is removed or inserted during standby. The Interval Shoot settings can also be configured from the [A Rec. Mode] menu. (p.124) 96