Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 144
Halftone Management System, Custom exits for ACIF and MVS Download, Windows port monitors
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 144 highlights
3. To verify that the gateway is working open the Internet browser and enter the following web address, replacing serverhostname with the DNS hostname of the system where the IPP gateway daemon is running: http:// serverhostname:631/printers Note: IPPGW can be ran only with default port which is 631. Halftone Management System If you have Print-on-Demand feature installed then you have Halftone Management System server running. Start the Halftone Management System server on the target InfoPrint Manager machine. The configuration does not need to be migrated. The halftones are handled automatically. Note: If you have Halftone Management System on Release 1, you need to buy the POD licenses, due to the fact that Halftone Management System has been moved to the POD feature. Custom exits for ACIF and MVS Download If there are any ACIF exits, you need to copy and restore all the MVS Download exits located in \bin\mvsdsubm.exe and \exits\mvsd (source files and objects) to the right location on the target server. Also, you need to copy all the ACIF exits located in \bin\ (apk*.dll, asciinp*.dll and dbblank.dll) and the source files located in \exits\acif\ directory. Windows port monitors To check if there are Windows port monitors, enter this command: # pdls -c destination -r attachment-type -U : If there is a destination with attachment-type=other-driver, you need to complete these migration steps for the port monitor: 1. Enter this pdls command: # pdls -c destination -r device-name -U : 2. The output will show the name of the port where this DSS sends the data. 3. From Windows Printers and Faxes, right click one of the printers, select Properties, and then select the Ports tab. 4. From the list of ports, you need to locate the one that was returned by the previous pdls command. Select it and press the Configure Port button. This will provide all the details of the port monitor used (port monitor type, IP address, etc). 5. Install the same port monitor on the target machine and create a port with the same properties identified in Step 4. Registry data about psfin You need to check first if the psfin data contains the default values. To do this, follow these steps: 1. Open the Management Console. 2. Go to Options -> Customize Input Manager. 126 InfoPrint Manager for Windows: Procedures