Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 355
Interrupting a job that is currently printing, Restarting the interrupted job, Interrupt Printing Job
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 355 highlights
This procedure does NOT stop the printer; it only stops the job that is currently printing. Other jobs continue to print on this printer. Once the job is stopped, the next job in the queue will start to print. To stop the printer (for example, to replace toner), use the procedure "Stopping a printer to perform scheduled maintenance" on page 344. Note: Refer to the online help in the InfoPrint Manager GUI if you need instructions on completing any of these steps. When you use the "Interrupting a job that is currently printing" procedure, the job fills a physical sheet, stops, and prints a message after the last page indicating the number of the last (AFP) page printed. The job shows on the GUI as Paused. When the job restarts, it starts on the next page of the job in the next logical partition. InfoPrint Manager prints a message at the end of the restarted section of the job indicating the page on which the printing started. You might want to use this procedure if you are printing a very long job, and you need to print another, more urgent job immediately. Interrupting a job that is currently printing 1. Open the InfoPrint Manager Operations GUI or the InfoPrint Manager Administration GUI. 2. In the GUI, find the printer where the currently printing job is, and select it. 3. Right-click on the printer, and select Interrupt Printing Job or left-click on the printer and then left-click on the icon on the toolbar. Note: If the Interrupt Printing Job action does not appear on the Printer menu or toolbar, use the Customize dialog to add the action. 4. Select from these options: v Click Now to interrupt the job as soon as possible v Click After current copy to interrupt the job after the current copy has finished printing. 5. Click OK. The job that is currently printing stops printing, its icon changes to black, and the job is listed in the job window of the main InfoPrint Manager GUI window. Other jobs continue to print on this printer. Restarting the interrupted job To restart the interrupted print job: v In the GUI, right-click on the interrupted job and select Resume. v Select the job and left-click on the icon on the toolbar. Chapter 34. General Operator and User Procedures 337