Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 336
Staple positions for InfoPrint 2105ES, Setting up finishing options for PS/PCL printers
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 336 highlights
Table 40. Staple positions for InfoPrint 2060ES, InfoPrint 2075ES, and InfoPrint 2090ES mapped to InfoPrint Manager values (continued) saddle-stitch not supported center Note: The InfoPrint Manager value saddle-stitch means staple down the center. With the InfoPrint 2060ES, InfoPrint 2075ES, and InfoPrint 2090ES, printers, saddle-stitch is only supported for sheets in the landscape orientation, and if this is specified along with bin 3, the sheets are sent to the BookletMaker. Staple positions for InfoPrint 2105ES Table 41. Staple positions for InfoPrint 2105ES mapped to InfoPrint Manager values InfoPrint Manager value Staple Position Portrait Landscape staple-top-left top left top right staple-bottom-left bottom left top left staple-top-right not supported not supported staple-bottom-right not supported not supported edge-stitch left edge top edge edge-stitch-2 not supported not supported edge-stitch-3 not supported not supported edge-stitch-left left edge top edge edge-stitch-right not supported not supported edge-stitch-top not supported not supported edge-stitch-bottom not supported not supported Setting up finishing options for PS/PCL printers Depending on the printer model, you can set up several finishing options. InfoPrint Manager can be set up to support many of these possibilities, including edge stitching (stapling one edge of the print job to create a booklet), saddle stitch (stapling in the middle of the page to create a folded booklet), and corner stapling. These sections describe how to set up finishing options for printers that can be sent PostScript and PCL, including the InfoPrint 70, InfoPrint 2085, and InfoPrint 2105. Telling InfoPrint Manager what options the finisher supports The first step in enabling the finishing options is to let InfoPrint Manager know what options the finisher supports. To set the appropriate values: Notes: 1. For the InfoPrint 70, InfoPrint 2060ES, InfoPrint 2075ES, InfoPrint 2085, InfoPrint 2090ES, InfoPrint 2105, and InfoPrint 2105ES, the PSF DSS will set default values for the job-finishings-supported attribute, so you do not need to do this setup process for the actual destination. These are the default settings: InfoPrint 70 staple-top-left, staple-bottom-left, staple-top-right, edge-stitch 318 InfoPrint Manager for Windows: Procedures