Ricoh InfoPrint Pro C900AFP InfoPrint Manager - Page 277
Using font capture with OpenType fonts, Enabling font capture for inline fonts
View all Ricoh InfoPrint Pro C900AFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 277 highlights
Using font capture with OpenType fonts Font capture allows a printer to capture a downloaded font and treat it as if it were a printer-resident font. Treating a downloaded font as a printer-resident font improves performance for future jobs that use the same fonts. Printers retain captured fonts across job boundaries and power cycles. Captured fonts can be deleted from the printer when additional space is required. Because OpenType fonts are large, you might want to make sure that your InfoPrint printer is set to support font capture. If you want to capture OpenType fonts that reside in a library on a particular drive, click the Font Installer's Capture check box. (far right column of the Top pane) for each font that you want to capture. For more information, see the Resource Installer online help system. Note: Do not capture sensitive fonts, such as signatures, because an unauthorized person could access the captured font, even from another system. Enabling font capture for inline fonts If the jobs that you run through your system use the same fonts, you might want to enable your actual destination to capture inline font resources. These inline fonts must have an object identifier (OID) so InfoPrint can capture them. Note: For many systems, this procedure is not recommended because captured inline fonts can be deleted when your printer needs more storage. If InfoPrint Manager cannot access these fonts, the jobs can either fail or print incorrectly. From the InfoPrint Manager Administration GUI: 1. Click the actual destination and select Printer → Properties. 2. From the actual destination's Printer Properties notebook, click Tuning. 3. Find the Capture inline OTF resources radio button. If you can't see it, click Show more. 4. Scroll to the bottom of the screen and select the Yes radio button for the Capture inline OTF resources setting. Using multiple fonts with limited printer memory When you are using the OpenType fonts and you receive the Out of memory error message, you can decrease the Maximum fonts to keep configuration item for InfoPrint Manager or increase the size of the character cache from the Printer console. To decrease the number of Maximum fonts to keep, complete these steps: 1. Right-click the actual destination in the InfoPrint Manager GUI and click Properties. 2. Click Tuning. 3. Find and change the Maximum fonts to keep value to a smaller number, such as 5. To increase the character cache size from the Printer's console, complete these steps: 1. Click Printer Definition. Chapter 26. Working with fonts 259