Samsung SCD5000 User Manual (ENGLISH) - Page 160

Display, Blinking, Action, Symptom, Possible Causes, Measure - service manual

Page 160 highlights

ENGLISH Troubleshooting Display CARD ERROR! Blinking Slow Informs that... Memory card is formatted by other device or has error in system folder Action Format the memory card using the camera menu ✤ If these instructions do not solve your problem, contact your nearest Samsung dealer or authorised service center/personnel. Symptom No power is supplied LCD monitor is blank DATE/TIME is wrong Cannot Record a video Focus does not adjust automatically Cassette tape will not load properly The memory card will not load properly Colour balance of picture is not natural Possible Causes The power is not connected properly The battery is dead The battery is too cold Viewfinder is on. Multi-AV cable is connected Display option is turned off The DATE/TIME is not set The built-in clock battery has exhausted. Protection tab is set to "SAVE" Power Switch is set to PLAY Power Switch is set to (CAMERA) Focus is set to manual mode Recording was done in a dark place Lens is covered with condensation Cassette is in wrong position The battery is exhausted Memory card is in wrong position Something fills in the memory card slot White balance adjustment is required Measure Connect the AC adapter properly, page 27 Replace the dead battery pack Warm up the battery or move to warmer place Close the viewfinder Remove the cable Press the DISPLAY button to bring back OSD Set the DATE/TIME, page 38 Replace the Li-ion battery for built-in clock, page 24 Cancel the protection, page 48 Set the Power Switch to REC Set the Mode Dial to (MOVIE) mode Set focus to AUTO Use strobe or lit the place Clear the lens and check the focus Insert the cassette tape properly, page 47 Charge the battery or use AC adapter Insert the memory card properly, page 83 Clear the memory card slot Set proper white balance, page 121 160

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

ENGLISH
160
160
Troubleshooting
If these instructions do not solve your problem, contact your nearest Samsung dealer or authorised service center/personnel.
No power is supplied
LCD monitor is blank
DATE/TIME is wrong
Cannot Record a video
Focus does not adjust automatically
Cassette tape will not load properly
The memory card will not load
properly
Colour balance of picture is not
natural
The power is not connected properly
The battery is dead
The battery is too cold
Viewfinder is on.
Multi-AV cable is connected
Display option is turned off
The DATE/TIME is not set
The built-in clock battery has
exhausted.
Protection tab is set to “SAVE”
Power Switch is set to PLAY
Power Switch is set to
(CAMERA)
Focus is set to manual mode
Recording was done in a dark place
Lens is covered with condensation
Cassette is in wrong position
The battery is exhausted
Memory card is in wrong position
Something fills in the memory card slot
White balance adjustment is required
CARD ERROR!
Slow
Display
Blinking
Informs that…
Action
Symptom
Possible Causes
Measure
Format the memory card using the camera menu
Memory card is formatted by other
device or has error in system folder
Connect the AC adapter properly, page 27
Replace the dead battery pack
Warm up the battery or move to warmer place
Close the viewfinder
Remove the cable
Press the DISPLAY button to bring back OSD
Set the DATE/TIME, page 38
Replace the Li-ion battery for built-in clock, page 24
Cancel the protection, page 48
Set the Power Switch to REC
Set the Mode Dial to
(MOVIE) mode
Set focus to AUTO
Use strobe or lit the place
Clear the lens and check the focus
Insert the cassette tape properly, page 47
Charge the battery or use AC adapter
Insert the memory card properly, page 83
Clear the memory card slot
Set proper white balance, page 121