Singer XL-580 FUTURA Instruction Manual - Page 88
Embroidery Pattern Is Mis-aligned
View all Singer XL-580 FUTURA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
EMBROIDERY PATTERN IS MIS-ALIGNED MACHINE SIDE HOOP SIDE Embroidering is continuing when thread is tangled. No stabilizer attached when using light or stretch fabric. If the thread remains tangled, the fabric may pucker and UXLQWKH¿QLVKHG embroidery. Stop embroidering, remove the hoop and untangle the thread. Upper thread tension is too tight. This can cause fabric to pucker and result in uneven feeding, reduce the thread tension. Refer to page 22 - 23. Attach stabilizer to the fabric. Refer to page 72 75. Fabric is not tight enough in the hoop. Tighten the fabric in the frames so that when the fabric is WDSSHGZLWKD¿QJHU it makes a sound like a drum. Refer to page 70 71. Needle tip is broken or needle is too thick. Select a correct needle. Refer to page 20 - 21. Thread is tangled somewhere along the thread path. Embroidery hoop is not correctly attached. Attach the hoop securely to the hoop bracket with the hoop mounting screws. Refer to page 76 77. If the thread is tangled on the spool pin or somewhere along the thread path, this will cause the thread to hang up and not advance through the machine. This will increase the upper thread tension and cause the fabric to pucker. Check the thread. Refer to page 16 - 19. 86 Hoop is obstructed against free motion. Check around the hoop and remove things which cause obstruction.