Sony BVME251 Operation Guide - Page 100

[Under Scan] Scan mode Aspect: [16:9] ([1.896:1] 1)) Input signal system and scan mode image 1920 × 1080 1280 × 720 2048 × 1080 720 × 576 720 × 487 Aspect: [2.39:1] 1920 × 1080 2048 × 1080 Aspect: [4:3] 720 × 576 720 × 487 Proceed as illustrated to insert and eject a USB memory stick (sold separately). See each menu for information about operations on USB memory stick data. Note Do not eject the USB memory stick while data is being saved or loaded. To insert and eject the USB memory stick USB connector 1) When a 2048 × 1080 signal is input [Over Scan] Scan mode Aspect: [16:9] ([1.896:1] 1)) Input signal system and scan mode image 1920 × 1080 1280 × 720 2048 × 1080 720 × 576 720 × 487 Aspect: [2.39:1] 5% mask portion 2048 × 1080 1920 × 1080 Aspect: [4:3] 720 × 576 720 × 487 5% mask portion 5% mask portion 1) When a 2048 × 1080 signal is input Inserting/Ejecting the USB memory stick The BKM-17R Monitor Control Unit has a USB connector. 100 Specifications Notes  Make sure to insert the USB memory stick into the USB connector in the correct direction.  When ejecting the USB memory stick, make sure that the unit is not accessing the USB memory stick. Notes on USB memory sticks The USB 3.0 memory sticks up to 8 GB have been tested with this product. Note This does not guarantee complete support of all USB memory sticks. Note on data read/write speed Data read/write speed may vary depending on the combination of the USB memory stick and the product that you use. Notes  Image data may be damaged in the following cases: - If you eject the USB memory stick, or turn the unit off while accessing the data - If you use a USB memory stick near static electricity or a magnetic field  We recommend backing up important data.  Do not touch the connector of the USB memory stick with anything, including your finger or metallic objects.  Do not strike, bend, or drop the USB memory stick.