Sony BVME251 Operation Guide - Page 50
Displaying Two Signals on One Screen, Butterfly], Blending]
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Submenu [Position] Setting Sets the position of the boundary line. Set from -100 (leftward) to +100 (rightward). (Default value: [000]) [Butterfly] Sets the butterfly display. Submenu [Line Display] [Line Color] [Line Bright] [Position] Setting Sets display mode of the boundary line. [Off]: Not displayed. [On]: Always displayed. Sets the boundary line color. You can select from [White] (white), [Red] (red), [Green] (green), [Blue] (blue), [Yellow] (yellow), [Cyan] (cyan) or [Magenta] (magenta), or [Black] (black). Sets the luminance of the boundary line. You can select from [High] (bright) or [Low] (dark). Sets the position of the boundary line. Set from -100 to +100. (Default value: [000]) [Blending] Sets the blending display. Submenu [Blending Ratio] Setting Sets the blending ratio when two images are mixed. Set from 000% (Signal A disappears) to 100% (Signal B disappears). (Default value: [050]) Displaying Two Signals on One Screen Two input signals are output on the monitor. You can select the display mode from [Side by Side] (side by side), [Wipe] (wipe), [Butterfly] (butterfly), and [Blending] (blending). This is useful for adjusting the color or comparing two pictures. You can input the file loaded in the [Capture] menu (page 54) of the [Function Setting] menu. [Side by Side] (side by side) Two pictures are displayed side by side. Signal A Signal B [Wipe] (wipe) Left and right pictures connected at the boundary position are displayed. The boundary line of the left and right area is changed with the PHASE knob of the controller. Signal A Signal B [Butterfly] (butterfly) The right picture is a leftright reversal picture of the left picture. The display range of the picture is changed with the PHASE knob of the controller. Signal A Signal B [Blending] (blending) Signal A and Signal B A picture that superimposes signal A and signal B is displayed. The mixed ratio of two input signals is changed with the PHASE knob of the controller. Notes You cannot select the same channel number as channels for signal A and signal B. Set a different channel number of the different input for signal A and signal B. When the wipe or blending mode is used, signal A and signal B should be genlocked to synchronize with each other. 50 Adjustment Using the Menus