Sony BVME251 Operation Guide - Page 38
Format], Screen Aspect], Matrix/Color Profile], 3G/HD/SD-SDI Auto], 3G-SDI], Auto], NTSC], PAL-M]
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Submenu [Copy From] Setting Copies signal setting data from other channel. For details of the setting, see [Copy From] (page 44). Note Use the controller of BKM-16R with software version 1.6 or higher or BKM17R to use the [Copy From] function. [Format] Submenu [3G/HD/SD-SDI] Setting Sets the serial digital signal format (Single-link 3G-SDI, HD-SDI or SDSDI). [3G/HD/SD-SDI Auto]: Changes the format automatically according to the Sampling Structure, Bit Depth, Picture and transport scanning method information for Payload ID of SMPTE-352M standard superimposed on the input signals. Note You can confirm the Payload ID information and the signal format status of the current monitor in [SDI Payload ID Status] (page 69) of the [System Status] menu or using the STATUS button on the controller. For details on the display using the STATUS button, see "Displaying the Monitor Status Page" (page 74). [Dual Link HD-SDI] [3G-SDI]: Sets the signal format. Select from [4:2:2 YCbCr 10bit], [4:4:4 YCbCr 10bit], [4:4:4 RGB 10bit], [4:4:4 YCbCr 12bit], [4:4:4 RGB 12bit], [4:4:4 XYZ 12bit]. [HD/SD-SDI Auto]: Changes the format automatically according to the format of the input signal. [SD-SDI] Sets the Dual-link HD-SDI signal format. [4:2:2 YCbCr 10bit] [4:4:4 YCbCr 10bit] [4:4:4 RGB 10bit] [4:4:4 YCbCr 12bit] [4:4:4 RGB 12bit] [4:4:4 XYZ 12bit] Submenu [Composite] [HDMI] Setting Sets the composite signal format. [Auto]: Changes automatically according to the format of the input signal. It will take a few seconds to detect the format of an input signal. It is recommended that a particular format be selected if it is determined. [NTSC] [PAL] [PAL-M] Sets the HDMI signal format. In this manual, the 800 × 600, 1024 × 768, 1280 × 960, 1280 × 1024, and 1400 × 1050 signals are referred to as the HDMI computer signals. For the signal format to be displayed, see page 92. [Screen Aspect] Submenu [HD] [SD] [DC 2048×1080] [HDMI Auto] Setting Sets the aspect ratio of the HD signal. [16:9] [2.39:1] Sets the aspect ratio of the SD signal. [16:9] [4:3] Sets the aspect ratio of the digital cinema signal (2048 × 1080). [1.896:1] [2.39:1] Sets the manual or automatic setting for the aspect ratio of the HDMI signal. [Off]: Select to set the aspect ratio manually with the controller, etc. [On]: Select to set the aspect ratio automatically according to the input signal. The aspect ratio is not set with the controller, etc. [Matrix/Color Profile] Submenu [Matrix] Setting Sets Matrix data (transmission matrix) depending on the input signal format. Four transmission matrix data are preset and can be selected for the HD or SD input signal respectively. For the type of the input signal, see "Available Signal Formats" (page 88). 38 Adjustment Using the Menus