Sony BVME251 Operation Guide - Page 23

Selecting the Monitor (Designation of the Monitor or Group ID Number) When the multiple monitors are connected by network connections, you can remotely connect the monitors from the controller by designating the set monitor ID number or group ID number. 3 Press the ENTER (Ent) button to confirm the setting. The monitor ID number, group ID number, or ALL is displayed in the display window. Notes  When the monitor with no assigned monitor ID number or group ID number is selected, the setting is not changed and the previous connection status is maintained  When there are monitors with the same ID number, the monitor with the lower IP address is selected.  Even if a different monitor ID number is set to the monitors, when the same IP address is set to another monitor, the monitor cannot be connected to the network. Display window Indicator 1 Press the corresponding button to select the connection mode. SINGLE button: Selects single connection mode. The designated monitor is connected remotely. The monitor ID number is displayed on all connected monitors when the button is held down. GROUP button: Selects group connection mode. The monitor of the designated group is connected remotely. The group ID number is displayed on all connected monitors when the button is held down. ALL button: Selects all connection modes. All monitors are connected remotely. The indicator corresponding to the pressed button flashes and lights after recognizing the monitor. 2 Select the monitor ID number for the single connection mode or group ID number for the group connection mode by pressing the UP/ DOWN or numeric button. Up to 99 is entered as the monitor ID or group ID number. 23 Selecting the Monitor (Designation of the Monitor or Group ID Number)