Sony BVME251 Operation Guide - Page 20
Initial settings
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Initial settings When you turn on the monitor for the first time after purchasing it, select the area where you intend to use this monitor from among the options. When the area is selected, the menu item settings suitable for the selected area are applied. Default value for each area ENTER button UP/DOWN buttons Ent button 1 Turn on the monitor with the power switch. The [Select Area] screen appears. North America Latin America Africa Australia/New Zealand [North America] [Latin America] [PAL & PAL-N Area] [NTSC & PAL-M Area] [Africa] [Australasia] [Europe] [Middle-East] [Asia Except Japan] [Japan] Argentina Paraguay Uruguay Other Area [NTSC Area] [PAL Area] [Color Temp] [D65] [D65] [D65] [D65] [D65] [D65] [D65] [D65] [D93] [Setup Level] [7.5%] [0%] [0%] [0%] [7.5%] [Color Profile] [ITU-R BT.709] [ITU-R BT.709] [ITU-R BT.709] [ITU-R BT.709] [ITU-R BT.709] [0%] [ITU-R BT.709] [7.5%] [0%] [0%] [ITU-R BT.709] [ITU-R BT.709] [ITU-R BT.709] Note on the setting of color temperature If you measure the color temperatures of different display types, such as CRT, LCD, or OLED, by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy chromaticity to the same value, the appearance may be different because of optical spectrum differences. To compensate for this difference, the [D93], [D65], [D61], [D55], and [User1] to [User5] settings (except [DCI]) of the monitor are adjusted by an offset 1). 1) The offset value applied (x-0.006, y-0.011) is based on the Judd's function to the CIE 1931 (x, y) value. Europe/Russia Middle East Asia Except Japan Japan 2 Press the UP or DOWN button of the controller to select the area where you intend to use the monitor and press the ENTER (Ent) button. If you select either [Latin America] or [Asia Except Japan], one of the following screens appears. If [Latin America] is selected: PAL&PAL-N area NTSC&PAL-M area Select [PAL & PAL-N Area] or [NTSC & PAL-M Area], and press the ENTER (Ent) button. If [Asia Except Japan] is selected: 20 Initial settings