Sony BVME251 Operation Guide - Page 86

Output SDI BNC (×2) (monitor output) Output signal amplitude: 800 mVp- p±10% Output impedance: 75 ohms unbalanced Transmission distance: 3G-SDI: 70 m max. 1) HD-SDI: 100 m max. 1) SD-SDI: 200 m max. 2) Composite output BNC type (×1) Loop-through 3), with 75 ohms automatic terminal function DC 12V OUT Circle 4-pin (female) (×1) 1) When using the 5C-FB coaxial cable made by Fujikura Ltd. or equivalent 2) When using the 5C-2V coaxial cable made by Fujikura Ltd. or equivalent 3) When the unit is turned off, the signal wave may be distorted. General Power requirements 100 V to 240 V AC, 1.2 A to 0.6 A, 50/ 60 Hz 24 V to 28 V DC, 4.5 A to 3.9 A Power consumption Approx. 117 W (when AC power source is used) / Approx. 107 W (when DC power source is used) (max.) Approx. 55 W (when AC power source is used) / Approx. 51 W (when DC power source is used) (average power consumption in the default status) Operating temperature 0 °C to 35 °C (32 °F to 95 °F) Recommended: 20 °C to 30 °C (68 °F to 86 °F) Operating humidity 30% to 85% (no condensation) Storage/transport temperature -20 °C to +60 °C (-4 °F to +140 °F) Storage/transport humidity 0% to 90% Operating/storage/transport pressure 700 hPa to 1060 hPa Mass Approx. 10.3 kg (22 lb 11 oz) Accessories supplied AC power cord (1) AC plug holder (1) HDMI cable holder (1) Before Using This Unit (1) CD-ROM (1) European Representative (1) Optional accessories BKM-17R/BKM-16R Monitor Control Unit BKM-37H/BKM-38H Controller Attachment Stand SMF-17R20 Monitor Interface Cable BVM-E171 Picture performance Panel OLED panel Picture size (diagonal) 419.7 mm (16 1/2 inches) Effective picture size (H × V) 365.8× 205.7 mm (14 1/2 × 8 1/8 inches) Resolution (H × V) 1920 × 1080 pixels (Full HD) Aspect 16:9 Pixel efficiency 99.99% Panel drive RGB 10-bit Panel display frame rate 48 Hz, 50 Hz, 60 Hz 1) See "Picture Frame Display" (page 97). Viewing angle (Panel specification) 89°/89°/89°/89° (typical) (up/down/left/right, contrast > 10:1) Normal scan 0% scan Native scan Mapping the pixels of the signal to the panel to one-to-one mode, or displaying an SD signal of non- square pixels (the number of H pixels of the signal system is 720 or 1440) or a 640 × 480 SD signal of HDMI video by scaling processing of doubling for the V direction and correct aspect ratio for the H direction and also optimizing and displaying a picture by modifying the aperture coefficient value, filter coefficient value, etc. Under scan 3% under scan Over scan Mask of 5% over scan portion in the normal scan Color temperature D55, D61, D65, D93, DCI 2) (Setting possible in other color temperature) Standard luminance (100% white signal input) 100 cd/m2 (Preset1-Preset5) 48 cd/m2 (Preset(DCI)) Color space (color gamut) ITU-R BT.709, EBU, SMPTE-C, DCI- P3 3), E171 Native 4), S-GAMUT/SGAMUT3 5), S-GAMUT3.Cine, ITU-R BT.2020 86 Specifications