Sony BVME251 Operation Guide - Page 72

Assigning a Function to a Function Button, Audio Level Meter]

Get Sony BVME251 PDF manuals and user guides View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 72 highlights

Submenu Setting  [Status]: Various status information regarding the monitor are displayed on a single page. For details on the display, see "Displaying the Monitor Status Page" (page 74).  [Aperture]: When the function is set to on, the frequency response can be modified. The degree of modification is set in the [Aperture Value] menu (page 45) of the [Auxiliary Setting] menu. For information about the aperture modification frequency for each signal system, see "Aperture Modification Frequency" on page 93.  [Mono]: When the button is set to on, a monochrome picture is displayed. When the button is set to off, the monitor switches automatically between color and monochrome mode depending on the color discrimination of the input adaptor.  [Blue Only]: Red and green signals are cut, and only the blue signal is displayed as a monochrome picture. It makes it easy to adjust chroma and phase, and to check VTR noise.  [R Off]: R (red) signals are cut respectively.  [G Off]: G (green) signals are cut respectively.  [B Off]: B (blue) signals are cut respectively.  [Chroma Up]: The chroma setting increases by 12 dB.  [Interlace]: Displays in the interlace mode.  [Pixel Zoom]: The part of the picture is magnified up to 8 times (page 51).  [Capture Load]: Displays the menu to load the captured picture from the USB memory, etc.  [Marker]: All markers are displayed on the screen.  [Aspect Marker]: An aspect marker is displayed on the screen.  [Area Marker 1]: An area marker 1 is displayed on the screen.  [Area Marker 2]: An area marker 2 is displayed on the screen.  [Center Marker]: The center marker is displayed on the screen.  [Aspect Marker-Line]: The line of the aspect marker is displayed on the screen. Submenu Setting  [Aspect Blanking-Half]: Aspect Blanking is set to half blanking.  [Aspect Blanking-Black]: The blanking level of Aspect Blanking is set to [0%] black level.  [Side by Side]: The screen is displayed in the side by side display mode.  [Wipe]: The screen is displayed in the wipe display mode.  [Butterfly]: The screen is displayed in the butterfly display mode.  [Blending]: The screen is displayed in the blending display mode.  [Error Notify Clear]: Clears the notification detected in the gamut error detection. ([OSD Notification])  [Audio Level Meter]: The audio level meter is displayed.  [ALM Hold Reset]: The peak hold of the audio level meter is canceled.  [Time Code]: The time code is displayed.  [Difference] 1): The difference between the luminance of the left 3D video signal and that of the right signal is displayed.  [Checkerboard] 1): The left and right 3D video signals are displayed in a checkerboard pattern.  [L/R Switch] 1): The left and right 3D video signals are displayed alternately by switching.  [Horopter Check] 1): The left and right 3D video signals are displayed.  [Flip H] 1): The 3D video signals are inverted horizontally and displayed.  [Black Frame Insertion] 1): The signal is displayed in black frame insertion mode.  [Black Detail Mode] 1): The signal is displayed in black detail mode.  [Degauss] 1): The CRT is degaussed.  [Flicker Free]: Displays without flicker. 1) Only function assigning is available with this monitor. Assigning a Function to a Function Button 1 Select the [Function Key] menu in the [Controller] menu. 2 Select the [F1] to [F16] button, and then the function assigned on each button. 72 Adjustment Using the Menus

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Adjustment Using the Menus
72
1)
Only function assigning is available with this monitor.
Assigning a Function to a Function Button
1
Select the [Function Key] menu in the [Controller]
menu.
2
Select the [F1] to [F16] button, and then the
function assigned on each button.
[Status]:
Various status information
regarding the monitor are displayed
on a single page.
For details on the display, see
“Displaying the Monitor Status Page”
(page 74).
[Aperture]:
When the function is set
to on, the frequency response can be
modified. The degree of
modification is set in the [Aperture
Value] menu (page 45) of the
[Auxiliary Setting] menu.
For information about the aperture
modification frequency for each
signal system, see “Aperture
Modification Frequency” on page 93.
[Mono]:
When the button is set to
on, a monochrome picture is
displayed. When the button is set to
off, the monitor switches
automatically between color and
monochrome mode depending on
the color discrimination of the input
adaptor.
[Blue Only]:
Red and green signals
are cut, and only the blue signal is
displayed as a monochrome picture.
It makes it easy to adjust chroma and
phase, and to check VTR noise.
[R Off]:
R (red) signals are cut
respectively.
[G Off]:
G (green) signals are cut
respectively.
[B Off]:
B (blue) signals are cut
respectively.
[Chroma Up]:
The chroma setting
increases by 12 dB.
[Interlace]:
Displays in the interlace
mode.
[Pixel Zoom]:
The part of the
picture is magnified up to 8 times
(page 51).
[Capture Load]:
Displays the menu
to load the captured picture from the
USB memory, etc.
[Marker]:
All markers are displayed
on the screen.
[Aspect Marker]:
An aspect marker
is displayed on the screen.
[Area Marker 1]:
An area marker 1
is displayed on the screen.
[Area Marker 2]:
An area marker 2
is displayed on the screen.
[Center Marker]:
The center marker
is displayed on the screen.
[Aspect Marker-Line]:
The line of
the aspect marker is displayed on the
screen.
Submenu
Setting
[Aspect Blanking-Half]:
Aspect
Blanking is set to half blanking.
[Aspect Blanking-Black]:
The
blanking level of Aspect Blanking is
set to [0%] black level.
[Side by Side]:
The screen is
displayed in the side by side display
mode.
[Wipe]:
The screen is displayed in
the wipe display mode.
[Butterfly]:
The screen is displayed
in the butterfly display mode.
[Blending]:
The screen is displayed
in the blending display mode.
[Error Notify Clear]:
Clears the
notification detected in the gamut
error detection. ([OSD
Notification])
[Audio Level Meter]:
The audio
level meter is displayed.
[ALM Hold Reset]:
The peak hold
of the audio level meter is canceled.
[Time Code]:
The time code is
displayed.
[Difference]
1)
:
The difference
between the luminance of the left 3D
video signal and that of the right
signal is displayed.
[Checkerboard]
1)
:
The left and
right 3D video signals are displayed
in a checkerboard pattern.
[L/R Switch]
1)
:
The left and right
3D video signals are displayed
alternately by switching.
[Horopter Check]
1)
:
The left and
right 3D video signals are displayed.
[Flip H]
1)
:
The 3D video signals are
inverted horizontally and displayed.
[Black Frame Insertion]
1)
:
The
signal is displayed in black frame
insertion mode.
[Black Detail Mode]
1)
:
The signal
is displayed in black detail mode.
[Degauss]
1)
:
The CRT is degaussed.
[Flicker Free]:
Displays without
flicker.
Submenu
Setting