Sony BVME251 Operation Guide - Page 54

[Capture] Captures the still picture for the standard of the color evaluation (HD Frame Capture). Note Use the BKM-16R with software version 1.6 or higher or BKM-17R to use the HD Frame Capture function. Submenu [Load] [Rename] Setting Loads the captured picture from the USB memory stick, etc. When the item is selected, you can select the file name to be loaded. Changes a file name of the captured picture in the USB memory stick, etc. When the item is selected, the file names are displayed. When the file name is selected, you can change the file name (1 to 20 characters).  Existing file name: Enter the existing file name.  [New Name]: Enter a new file name. [Delete] Note "." must not be used as the first character. Deletes the file of the captured picture in the USB memory stick, etc. When the item is selected, the file names in the USB memory stick, etc. are displayed. When the file name is selected, the following message appears. [Delete this file ?]  [OK]: To delete the data, press the ENTER (Ent) button.  [Cancel]: To cancel, press the MENU button. Capturing the Picture of the HD Signal (HD Frame Capture) The frame picture of the 3G/HD-SDI input signal is captured and saved as a picture file in the USB memory stick, etc. This is used to confirm the color tone and picture angle of the current scene and recorded scene, or as the reference picture to adjust the monitor. To save the captured frame, we recommend using "Memory Stick PRO (High-Speed)" or "Memory Stick PRO Duo (High-Speed)". Notes  Use the BKM-16R with software version 1.6 or higher or BKM-17R to use the HD Frame Capture function.  The file is saved in TIFF. The file size is a maximum of 13 MB.  The picture file is captured or loaded without deterioration.  The saved file may not be opened due to the PC application used.  The HD Frame Capture function is effective only for the 3G/HD-SDI signal.  The interlace input signal is captured in each frame (first field (F=0) and second field (F=1)).  The frame is not captured in the following cases: - When [Side by Side], [Wipe], [Butterfly], or [Blending] is set to [On] - When [Pixel Zoom] is set to on - When the internal signal is displayed - When the input signal has no sync signal - When the captured frame is displayed  When a BVM-E/BVM-F series monitor or this unit with software version earlier than 1.1 is used, pictures that have been captured in the following Gamma menus cannot be loaded. [S-LOG3(SDR)], [S-LOG2(SDR)], [2.4(HDR)], [SLOG3(HDR)], [S-LOG2(HDR)], [SMPTE ST2084(HDR)], [ITU-R BT.2100(HLG)], or [SLOG3(Live HDR)] To capture 1 Connect the USB memory stick, etc. to the controller. For details on the USB memory stick, see "Inserting/ Ejecting the USB memory stick" on page 100. For the memory stick, see the operating instructions of BKM16R. 2 Display the picture and press the CAPTURE button of the controller at the point on the picture to be captured. The captured still picture appears on the display. To hide characters on the monitor, set the CHAR OFF button to on. As the characters are hidden, it becomes easy to confirm the still picture. To display the characters, set the CHAR OFF button to off. 3 Press the ENTER (Ent) button. The display of the captured still picture is cleared and saving in the USB memory stick, etc. of the captured frame starts. The "In progress " is displayed and "" flashes during data saving. (It may take some time to write the data.) 54 Adjustment Using the Menus