Sony BVME251 Operation Guide - Page 78
Upgrading the Controller, When a version earlier than 1.2 of the software
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
flashing during upgrade, but the data are being upgraded correctly. Notes Do not remove the USB memory stick, etc. from the controller during upgrading or disconnect the LAN cable between the monitor and controller. Do not turn off the power of the monitor and controller during upgrade. Do not upgrade the monitor if an error notification is displayed when the monitor is used with DC input. After completion of upgrade, the display on the screen disappears, and the system is restarted. After restarting, the previous screen is displayed. 6 Select the [Monitor Upgrade] menu in the [System Configuration] menu and confirm that the version of the selected item has been upgraded. When the upgrade sequence does not move forward correctly, the message such as [Procedure failure] is displayed in red. If this error message is displayed, contact your Sony representative. Upgrading the Controller 1 Connect a USB memory stick to the USB connector of the controller. Note When you use the BKM-16R, insert "Memory Stick PRO" into the Memory Stick insertion slot of the controller. 2 Select the [Controller Upgrade] menu in the [Controller] menu (page 73). 3 Enter the 4-digit password. The [Controller Upgrade] screen is displayed and the current version is indicated. For the password, see [Password] (page 65) of the [System Configuration] menu. 4 Select the item to upgrade from [Software Upgrade] or [Kernel Upgrade]. After about 10 seconds, the old and new software versions or kernel version, and the message to confirm that you wish to execute the upgrade are displayed. Display example Controller software will be upgraded and monitor will restart. Are you sure ? 5 Confirm the data version and press the ENTER (Ent) button. Upgrading starts. When a version earlier than 1.2 of the software for the controller is upgraded (only for BKM-16R) When upgrading starts, the dot (indicator) lights moving from left to right in the display window of the controller. The dot may stop during upgrade, but the data is being upgraded correctly. When version 1.2 or later of the software for the controller is upgraded When upgrade starts, the indicator lights turning clockwise in the display window of the controller. The indicator may stop during upgrade, but the data is being upgraded correctly. After upgrading, all indicators light for about 1 second. Notes Do not remove the USB memory stick from the controller during upgrade or disconnect the LAN cable between the monitor and controller. Do not turn off the power of the monitor and controller during upgrade. Do not upgrade the controller if an error notification is displayed when the monitor is used with DC input. Check that no errors or warnings are displayed on the indicators when the upgrade is completed. 78 Upgrading the Monitor and Controller