Sony BVME251 Operation Guide - Page 44
RGB/YCC Range], 1080I/PsF], Copy From], About [S-LOG3Live HDR], Full], Limit]
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Submenu [HDMI Auto] Setting About [S-LOG3(Live HDR)] [S-LOG3(Live HDR)] is the setting for which this unit is used as the reference monitor in the S-Log3 Live HDR workflow 1) which Sony advocates. Displays the S-Log3 input signal adding the system gamma. This system gamma is set so that the compatibility with the monitoring of the conventional (SDR) environment is valued and you can perform suitable picture expression without discomfort when adjusting the picture of the HDR camera. 1) Refer to the explanation of the Live HDR workflow on the "What's HDR" page. Sets the manual or automatic setting for the transmission matrix and color space of the HDMI signal. [Off]: Select to use the value set in the [HD] or [SD] menu for the transmission matrix and the value set in the [Color Profile] menu for the color space. [On]: Select to set the transmission matrix and color space automatically according to the input signal. [RGB/YCC Range] Submenu [RGB Range] [HD] [DC 2048×1080] [HDMI] Setting Sets the quantization range when a 4:4:4 RGB SDI signal is input and the signal system is 1920 × 1080 or 1280 × 720. [Full]: 0 (black level) to 1023 (10bit)/4095 (12bit) (white level) [Limit]: 64(10bit)/256 (12bit) (black level) to 940 (10bit)/3760 (12bit) (white level) Sets the quantization range when a 4:4:4 RGB SDI signal is input and the signal system is 2048 × 1080. [Full]: 0 (black level) to 1023 (10bit)/4095 (12bit) (white level) [Limit]: 64 (10bit)/256 (12bit) (black level) to 940 (10bit)/3760 (12bit) (white level) Sets the display mode for the HDMI signal. [Full]: 0 (black level) to 255 (8bit)/ 1023 (10bit)/4095 (12bit) (white level) [Limit]: 16 (8bit)/64 (10bit)/256 (12bit) (black level) to 235 (8bit)/940 (10bit)/3760 (12bit) (white level) Submenu [YCC Range] [HDMI] [HDMI Auto] [1080I/PsF] Submenu [24PsF] [25PsF/50I] [30PsF/60I] [Copy From] Submenu [Other CH] [Other Monitor] [Monitor ID] Setting Sets the display mode for the HDMI signal. [Full]: Y/Cb/Cr: 0 to 255 (8bit)/1023 (10bit)/4095 (12bit) [Limit]: Y: 16 (8bit)/64 (10bit)/256 (12bit) to 235 (8bit)/940 (10bit)/ 3760 (12bit) Cb/Cr: 16 (8bit)/64 (10bit)/256 (12bit) to 240 (8bit)/960 (10bit)/ 3840 (12bit) Sets the manual or automatic setting for the quantization range of the HDMI signal. [Off]: Select to use the quantization range set in the [HDMI] menu. [On]: Select to set the quantization range automatically according to the input signal Setting Sets the display mode for the 1080/ 24PsF signal. [1080I] [1080PsF] Sets the display mode for the 1080/ 25PsF, 50i signal. [1080I] [1080PsF] Sets the display mode for the 1080/ 30PsF, 60i signal. [1080I] [1080PsF] Setting Copies other data in this monitor. When the item is selected, you can designate the channel to be copied. Copies data from other monitor. Note Use the BVM-E251/BVM-E171 as a source monitor to use the [Other Monitor] function. Enters the ID number of the source monitor. When the NETWORK switch is set to PEER TO PEER, this is not selectable. When the item is selected, you can designate the source monitor. When the ID number is entered, you can designate the channel to be copied. 44 Adjustment Using the Menus