Sony BVME251 Operation Guide - Page 36
Before setting, Submenu, Setting
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
The current channel is displayed. Perform the input setting for the selected channel. Before setting Set the input signal for each channel. A channel number (1 to 30) is entered with the numeric buttons (page 27). Note This menu is not selectable in the following cases: When [Side by Side] is set to [On] When [Wipe] is set to [On] When [Butterfly] is set to [On] When [Blending] is set to [On] Submenu [Format] Setting Sets the input signal type. For details of the setting, see [Format] (page 38). Note The default setting is [3G/HD/SD-SDI Auto]. Submenu [Input No] [Screen Aspect] [Color Temp] Setting Enters the input connector number if there are two inputs with the same type of input connectors. When [Format] is set to [3G/HD/SDSDI Auto] or [4:2:2 YCbCr 10bit] or [4:4:4 YCbCr 10bit], [4:4:4 RGB 10bit], [4:4:4 YCbCr 12bit], [4:4:4 RGB 12bit], [4:4:4 XYZ 12bit] of [3G-SDI], [HD/ SD-SDI Auto], [SD-SDI], select from the following: [Input1] [Input2] When [Format] is set to [4:2:2 YCbCr 10bit] or [4:4:4 YCbCr 10bit], [4:4:4 RGB 10bit], [4:4:4 YCbCr 12bit], [4:4:4 RGB 12bit], [4:4:4 XYZ 12bit] of [Dual Link HD-SDI], [Input1&2] is selected. Selects the aspect ratio. For details of the setting, see [Screen Aspect] (page 38). Sets the color temperature. Except for the XYZ format signal Select from the following: [D93] [D65] [D61] [D55] [DCI] [User1] to [User5] When [DCI] is selected, the color temperature is set to x=0.314 and y=0.351 in the CIE chromaticity coordinate. When [D93], [D65], [D61], [D55], or [DCI] data is changed, they are displayed as [D93*], [D65*], [D61*], [D55*], or [DCI*]. For the XYZ format signal Select from the following: [DCI XYZ] [User XYZ1] to [User XYZ5] When [DCI XYZ] data is changed, it is displayed as [DCI XYZ*]. Note If you measure the color temperatures of different display types, such as CRT, LCD, or OLED, by using a common (or general) color analyzer that is based on CIE 1931, and adjust the xy chromaticity to the same value, the appearance may be different because of optical spectrum differences. To compensate for this difference, the [D93], [D65], [D61], [D55], and [User1] to [User5] settings (except [DCI]) of the monitor are adjusted by an offset 1). 1) The offset value applied (x-0.006, y- 0.011) is based on the Judd's function to the CIE 1931 (x, y) value. 36 Adjustment Using the Menus