Sony BVME251 Operation Guide - Page 69

Format], Name], InputX, Payload ID], Video Standard], Sampling Structure], Bit Depth], Picture Rate]

Get Sony BVME251 PDF manuals and user guides View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Submenu [CH Status] Setting Displays the information on the used channels. The information of the internal signal assigned to the channel number is displayed on the channels 91 to 97.  [CH]: Channel number  [Inp]: Input connector number  [Format]: Input signal format  [Name]: Channel name For details on the assigned signal, see "Channel numbers 91 to 97 assignment" on page 27. Submenu [SDI Payload ID Status] Setting Displays the information of the Payload ID data superimposed on the SDI signal and current signal status of the monitor. When [Format] of the [Channel Configuration] menu is set to a setting other than [Composite] or [HDMI], the following is displayed.  InputX: Input connector [Input1], [Input2], or [Input1&2] of the displayed information is displayed.  [Payload ID]: XX XX XX XX (4byte data for Payload ID of the SMPTE-352M standard) Displays the 4-byte data in hexadecimal in sequence of Byte 1, Byte 2, Byte 3, and Byte 4. When the Payload ID information is not set, only [Current Status] is displayed and [---] is displayed for other items. When the following information is not decoded, [Unknown] is displayed.  [Video Standard]: Decode display of Byte 1_Bit 6-0 (SD-SDI/HD-SDI/ 3G-SDI/Dual Link HD-SDI, etc.)  [Sampling Structure]: Decode display of Byte 3_Bit 3-0 (4:2:2 Y/ Cb/Cr / 4:4:4 Y/Cb/Cr / 4:4:4 G/B/R, etc.)  [Bit Depth]: Decode display of Byte 4_Bit 1-0 (8bit/10bit/12bit)  [Picture Rate]: Decode display of Byte 2_Bit 3-0 (23.98/24/25/29.97/ 30/50/59.94/60)  [Scanning Method]: Decode display of Byte 2_Bit 7/decode display of Byte 2_Bit 6 (Interlace/Progressive, Progressive/Progressive, etc.)  [Link Number]: Decode display of Byte 4_Bit 7-6 (Single/Link_1 / Link_2 / Link_3 / Link_4)  [Current Status]: Current status of the monitor  [Format]: Displayed as "[Video Standard] + [Sampling Structure] + [Bit Depth]" [Video Standard]: 3G/DL/HD/SD [Sampling Structure]: 422 YCbCr/ 444 YCbCr/444 RGB/444 XYZ [Bit Depth]: 10/12  [I/PsF/P]: [Interlace] / [PsF] / [Progressive] You can confirm the same information using the STATUS button on the controller. For details, see "Displaying the Monitor Status Page" page 74 69 Adjustment Using the Menus

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Adjustment Using the Menus
69
Submenu
Setting
[CH Status]
Displays the information on the used
channels.
The information of the internal signal
assigned to the channel number is
displayed on the channels 91 to 97.
[CH]:
Channel number
[Inp]:
Input connector number
[Format]:
Input signal format
[Name]:
Channel name
For details on the assigned signal, see
“Channel numbers 91 to 97 assignment”
on page 27.
[SDI Payload ID
Status]
Displays the information of the Payload
ID data superimposed on the SDI signal
and current signal status of the monitor.
When [Format] of the [Channel
Configuration] menu is set to a setting
other than [Composite] or [HDMI], the
following is displayed.
InputX:
Input connector [Input1],
[Input2], or [Input1&2] of the
displayed information is displayed.
[Payload ID]:
XX XX XX XX (4-
byte data for Payload ID of the
SMPTE-352M standard)
Displays the 4-byte data in
hexadecimal in sequence of Byte 1,
Byte 2, Byte 3, and Byte 4.
When the Payload ID information is
not set, only [Current Status] is
displayed and [---] is displayed for
other items. When the following
information is not decoded,
[Unknown] is displayed.
[Video Standard]:
Decode display
of Byte 1_Bit 6-0 (SD-SDI/HD-SDI/
3G-SDI/Dual Link HD-SDI, etc.)
[Sampling Structure]:
Decode
display of Byte 3_Bit 3-0 (4:2:2 Y/
Cb/Cr / 4:4:4 Y/Cb/Cr / 4:4:4 G/B/R,
etc.)
[Bit Depth]:
Decode display of Byte
4_Bit 1-0 (8bit/10bit/12bit)
[Picture Rate]:
Decode display of
Byte 2_Bit 3-0 (23.98/24/25/29.97/
30/50/59.94/60)
[Scanning Method]:
Decode display
of Byte 2_Bit 7/decode display of
Byte 2_Bit 6 (Interlace/Progressive,
Progressive/Progressive, etc.)
[Link Number]:
Decode display of
Byte 4_Bit 7-6 (Single/Link_1 /
Link_2 / Link_3 /
Link_4)
[Current Status]:
Current status of
the monitor
[Format]:
Displayed as “[Video
Standard] + [Sampling Structure] +
[Bit Depth]”
[Video Standard]: 3G/DL/HD/SD
[Sampling Structure]: 422 YCbCr/
444 YCbCr/444 RGB/444 XYZ
[Bit Depth]: 10/12
[I/PsF/P]:
[Interlace] / [PsF] /
[Progressive]
You can confirm the same information
using the STATUS button on the
controller. For details, see "Displaying the
Monitor Status Page" page 74
Submenu
Setting