Sony BVME251 Operation Guide - Page 70

[Controller] Menu

Get Sony BVME251 PDF manuals and user guides View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Submenu [HDMI Status] Setting Displays the signal information of the HDMI signal. When the following information is not decoded, [Unknown] is displayed.  [Pixel Encoding]: [RGB 4:4:4] / [YCbCr 4:4:4] / [YCbCr 4:2:2]  [Color Depth]: [8bit] / [10bit] / [12bit]  [Colorimetry]: [ITU-R BT.601] / [ITU-R BT.709] / [ITU-R BT.2020]  [RGB/YCC Range]: [Limit] / [Full]  [EOTF]: [SDR Gamma] / [HDR Gamma] / [SMPTE ST2084(HDR)] / [ITU-R BT.2100(HLG)] [Model Name] [Serial No] [Software Version] [Operation Time] [Panel On Time] [Network Switch] [Controller Status] Notes  The [Colorimetry] status is displayed when [HDMI Auto] is set to [On] in the [Matrix/Color Profile] menu of the [Channel Configuration] menu, and the YCbCr signal is input.  When the [HDMI Auto] menu is set to [On] in the [RGB/YCC Range] menu of the [Channel Configuration] menu, the [RGB/ YCC Range] status is displayed.  When HDR is enabled on the BVME171, the [EOTF] status is displayed. You can confirm the same information using the STATUS button on the controller. For details, see "Displaying the Monitor Status Page" (page 74). Displays the model name of the monitor. Displays the serial number of the monitor. Displays software version of the monitor. Displays operation time (hours, in total) of the monitor. Displays brighten time (hours, in total) of the panel. Displays the NETWORK switch setting. Displays information on the controller.  [Model Name]: Displays the model name.  [Serial No]: Displays the serial number.  [Software Version]: Displays software version.  [Network Switch]: Displays the NETWORK switch setting. [Controller] Menu This menu is for the network setting and assigning the function to the function button of the controller. When [Controller] is selected, the following menu is displayed. [Network] Sets the remote control function of the network. For the setting value, consult the network administrator. [Network Setting] Sets the IP address, subnet mask, and default gateway. Submenu [IP Address] Setting Sets the IP address. (Default value: [192.168.000.100]) [Subnet Mask] Note When the NETWORK switch is set to PEER TO PEER, the IP address is set to "192.168.0.100" regardless of the display. When the NETWORK switch is set to LAN, the IP address is set to the displayed one. Sets the subnet mask. (Default value: [255.255.255.000]) [Default Gateway] [Address] [Cancel] [Confirm] Note When the NETWORK switch is set to PEER TO PEER, the subnet mask is set to "255:255:255:000" regardless of the display. When the NETWORK switch is set to LAN, the subnet mask is set to the displayed one. Sets whether or not to set the default gateway ([Off] or [On]). Sets the address of the default gateway. (Default value no setting)) Cancels the changed or confirmed setting. Saves the changed or confirmed setting. [Protocol Setting] Sets the required items for communications such as the port number. For the setting value, consult the network administrator. 70 Adjustment Using the Menus

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
Adjustment Using the Menus
70
[Controller] Menu
This menu is for the network setting and assigning the
function to the function button of the controller.
When [Controller] is selected, the following menu is
displayed.
[Network]
Sets the remote control function of the network.
For the setting value, consult the network administrator.
[Network Setting]
Sets the IP address, subnet mask, and default gateway.
[Protocol Setting]
Sets the required items for communications such as the
port number.
For the setting value, consult the network administrator.
[HDMI Status]
Displays the signal information of the
HDMI signal.
When the following information is not
decoded, [Unknown] is displayed.
[Pixel Encoding]:
[RGB 4:4:4] /
[YCbCr 4:4:4] / [YCbCr 4:2:2]
[Color Depth]:
[8bit] / [10bit] /
[12bit]
[Colorimetry]:
[ITU-R BT.601] /
[ITU-R BT.709] / [ITU-R BT.2020]
[RGB/YCC Range]:
[Limit] / [Full]
[EOTF]:
[SDR Gamma] / [HDR
Gamma] / [SMPTE ST2084(HDR)] /
[ITU-R BT.2100(HLG)]
Notes
The [Colorimetry] status is
displayed when [HDMI Auto] is set
to [On] in the [Matrix/Color Profile]
menu of the [Channel
Configuration] menu, and the
YCbCr signal is input.
When the [HDMI Auto] menu is set
to [On] in the [RGB/YCC Range]
menu of the [Channel
Configuration] menu, the [RGB/
YCC Range] status is displayed.
When HDR is enabled on the BVM-
E171, the [EOTF] status is displayed.
You can confirm the same information
using the STATUS button on the
controller. For details, see “Displaying the
Monitor Status Page” (page 74).
[Model Name]
Displays the model name of the
monitor.
[Serial No]
Displays the serial number of the
monitor.
[Software Version]
Displays software version of the
monitor.
[Operation Time]
Displays operation time (hours, in total)
of the monitor.
[Panel On Time]
Displays brighten time (hours, in total)
of the panel.
[Network Switch]
Displays the NETWORK switch setting.
[Controller Status]
Displays information on the controller.
[Model Name]:
Displays the model
name.
[Serial No]:
Displays the serial
number.
[Software Version]:
Displays
software version.
[Network Switch]:
Displays the
NETWORK switch setting.
Submenu
Setting
Submenu
Setting
[IP Address]
Sets the IP address. (Default value:
[192.168.000.100])
Note
When the NETWORK switch is set to
PEER TO PEER, the IP address is set to
“192.168.0.100” regardless of the
display.
When the NETWORK switch is set to
LAN, the IP address is set to the
displayed one.
[Subnet Mask]
Sets the subnet mask. (Default value:
[255.255.255.000])
Note
When the NETWORK switch is set to
PEER TO PEER, the subnet mask is set
to “255:255:255:000” regardless of the
display.
When the NETWORK switch is set to
LAN, the subnet mask is set to the
displayed one.
[Default Gateway]
Sets whether or not to set the default
gateway ([Off] or [On]).
[Address]
Sets the address of the default gateway.
(Default value: [---.---.---.---] (no
setting))
[Cancel]
Cancels the changed or confirmed
setting.
[Confirm]
Saves the changed or confirmed setting.