Sony BVME251 Operation Guide - Page 74
Displaying the Monitor Status
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Submenu [Key Protect] Setting Sets the key protection. [On]: The button on the controller (except the menu operation buttons and monitor selection buttons) and the parallel remote do not function and other settings are not changeable. [Off]: Release the lock. Displaying the Monitor Status Page When Status has been assigned to a function button of the controller, various information, such as the setting status, display mode, and input signal information of the currently displayed video signal, are displayed on the monitor status pages. For how to assign a function to a function button, see "Assigning a Function to a Function Button" (page 72). Note [Pixel Zoom] is not set to on when the monitor status page is displayed. 1 Press the STATUS button on the controller to set it to On. Page 1/3 of [STATUS] display is displayed. 2 Select the [STATUS] page you wish to view using the UP/DOWN button on the controller. You can select the [STATUS] page from among 1/3, 2/3, and 3/3. For the contents of each page, see below. To cancel the display of the [STATUS] page Press the STATUS button on the controller again. Page 1/3 Information on the setting status of the input signal and the display mode is displayed. 74 Displaying the Monitor Status Page [CH]: Displays the currently selected channel number and channel name. [Detected Signal]: Displays the signal system with the format detected. [Format]: Displays [Format] set in the [Channel Configuration] menu. [Input No]: Displays [Input No] set in the [Channel Configuration] menu.