Sony BVME251 Operation Guide - Page 17
Connecting Multiple Units with the LAN
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
BKM-37H/38H/39H. Or connect the output cable of the AC adaptor supplied with the controller to the DC 12V connector of the controller. Note on connecting the cable to the DC 12V OUT connector Insert the connector so as to fit the shape of the DC 12V OUT connector. Fit the shape of the connector. Connecting Multiple Units with the LAN The controller controls up to 32 monitors. Up to three controllers are connected to one monitor in single mode. Notes The controller cannot control monitors in another subnetwork. When you connect the BKM-16R, refer to the operating instructions of BKM-16R. NETWORK switch: Set to LAN. NETWORK switch: Set to LAN. LAN (10/100) connector LAN (10/100) connector Switching hub (recommended: with AUTO MDI/ MDI-X function) AC adaptor (supplied with the BKM-17R) Controller (BKM-17R) LAN (10/100) connector DC 12V connector NETWORK switch: Set to LAN. 1 Turn off the power switch of the monitor before connecting the units. 17 Connecting Multiple Units with the LAN