Sony BVME251 Operation Guide - Page 35

Submenu [External Memory] Setting For the XYZ format signal When the ID number is entered, you can select from the following:  [DCI XYZ]: Copies the color temperature of DCI XYZ.  [User XYZ1] to [User XYZ5]: Copies the color temperature of User XYZ1 to User XYZ5. When [DCI XYZ] data is changed, it is displayed as [DCI XYZ*]. Copies data in the USB memory stick, etc. Note Use the USB memory stick, etc. with data stored by the BVM-E251/BVME171 to use the [External Memory] function. When the item is selected, the file names in the source USB memory stick, etc. are displayed. Except for the XYZ format signal When the file is selected, you can select from the following:  [D93]: Copies the color temperature of D93.  [D65]: Copies the color temperature of D65.  [D61]: Copies the color temperature of D61.  [D55]: Copies the color temperature of D55.  [DCI]: Copies the color temperature of DCI.  [User1] to [User5]: Copies the color temperature of User1 to User5. When [D93], [D65], [D61], [D55], or [DCI] data is changed, they are displayed as [D93*], [D65*], [D61*], [D55*], or [DCI*]. For the XYZ format signal When the file is selected, you can select from the following:  [DCI XYZ]: Copies the color temperature of DCI XYZ.  [User XYZ1] to [User XYZ5]: Copies the color temperature of User XYZ1 to User XYZ5. When [DCI XYZ] data is changed, it is displayed as [DCI XYZ*]. Restore Factory Data Resets the color temperature to the default setting. You cannot select this when the setting is the default value. The following message appears to confirm the data reset operation. [Restore factory data ?]  [OK]: To reset the data, press the ENTER (Ent) button.  [Cancel]: To cancel, press the MENU button. [Position Adj] Adjusts the position of the picture when the analog signal is input. When the item is selected, the signal system to be set is displayed. You can select the item when the composite signal is displayed. To hide the characters on the monitor during adjustment Set the CHAR OFF button of the controller to on. As the characters on the display are hidden, it becomes easy to adjust the picture. To display the characters, set the CHAR OFF button to off. Note This menu is not selectable when the internal signal or captured frame is displayed. Submenu [H Shift] [V Shift] Setting Adjusts the horizontal position of the picture. As the setting increases, the picture moves to the right, and as the setting decreases, the picture moves to the left. (Default value: [000]) Set in the [H Shift Offset] menu (page 37) of the [Channel Configuration] menu when it is necessary to adjust the difference of the horizontal position for different input signals of the same signal system, etc. Adjusts the vertical position of the picture. As the setting increases, the picture moves up, and as the setting decreases, the picture moves down. (Default value: [000]) [Channel Configuration] Menu This menu is used for pertaining data to the input signals. When [Channel Configuration] is selected, the following menus are displayed. 35 Adjustment Using the Menus