Sony BVME251 Operation Guide - Page 61
Protocol Setting], SONY], New Name], Cancel], Confirm]
View all Sony BVME251 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Submenu [IP Address] Setting Sets the IP address. (Default value: [192.168.000.001]) [Subnet Mask] Note When the NETWORK switch is set to PEER TO PEER, the IP address is set to "192.168.0.1" regardless of the display. When the NETWORK switch is set to LAN, the IP address is set to the displayed one. Sets the subnet mask. (Default value: [255.255.255.000]) [Default Gateway] [Address] [Cancel] [Confirm] Note When the NETWORK switch is set to PEER TO PEER, the subnet mask is set to "255.255.255.000" regardless of the display. When the NETWORK switch is set to LAN, the subnet mask is set to the displayed one. Sets whether or not to set the default gateway ([Off] or [On]). Sets the address of the default gateway. (Default value no setting)) Cancels the changed or confirmed setting. Saves the changed or confirmed setting. [Protocol Setting] Sets the required items for communications such as the port number. For the setting value, consult the network administrator. Submenu [SDCP/SDAP Community] [SDCP Port No] [SDAP Port No] [SDAP Broadcast] [SDAP Broadcast Period] Setting Sets the SDCP/SDAP community name. When the item is selected, you can enter the community name (four characters). [SONY]: SONY is entered as a community name. [New Name]: Enter a new name. Sets the SDCP port number. Set from 53434 to 53534. (Default value: [53484]) Sets the SDAP port number. Set from 53812 to 53912. (Default value: [53862]) Sets whether or not to issue the SDAP ([Disable] or [Enable]). Sets the period (seconds) to issue the SDAP. Set from 05 to 30. (Default value: [15]) Submenu [Acceptable IP Address] [Reset Protocol Setting] Setting Sets the IP address to connect. When the item is selected, you can set [IP1] to [IP4]. [Cancel]: Cancels the changed or confirmed setting. [Confirm]: Saves the changed or confirmed setting. Resets the protocol setting. When the item is selected, the following message appears. [Are you sure ?] [OK]: To reset data, press the ENTER (Ent) button. [Cancel]: To cancel, press the MENU button. [Parallel Remote] Sets the parallel remote function. Submenu [Parallel Remote] Setting Selects whether or not to use the parallel remote functions ([Off] or [On]). 61 Adjustment Using the Menus