Sony DSC F828 Operating Instructions - Page 55
Shooting with shutter speed priority mode, Mode dial: S, Set the mode dial to S. - camera case
UPC - 027242634237
View all Sony DSC F828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Shooting with shutter speed priority mode Mode dial: S You can adjust the shutter speed manually. If you shoot a moving subject at a higher shutter speed, it appears as if frozen on the image. At a lower shutter speed, the subject appears as if it flowing. Aperture value is automatically adjusted to attain correct exposure according to the brightness of the subject. High shutter speed Slow shutter speed Command dial Shutter button Mode dial a Set the mode dial to S. b Select a shutter speed with the command dial. 80min S 8M FINE 101 98 200 S 250 320 MAF F2.0 0EV The shutter speed can be selected from 1/2000 to 30 seconds. If you select 1/25 second or slower shutter speeds, the NR slow shutter function is automatically activated. In such cases, "NR" is indicated at the left of shutter speed indicator. c Shoot the image. • Shutter speeds of one second or longer are indicated with ["] after the value, such as 1". • If the proper exposure is not obtained after making the settings, the setting value indicators on the screen flashes when the shutter button is pressed halfway down. You can shoot in this condition, but we recommend that you adjust the flashing values again. • The flash is set to (Forced flash) or (No flash). • When the shutter speed is high, the amount of flash light may be insufficient even if you strobes the flash. • You can adjust the exposure value (page 59). NR slow shutter The NR slow shutter mode reduces noise from recorded images, providing clear images. When using shutter speeds of 1/25 second or slower, the camera automatically works the NR slow shutter mode and "NR" is indicated next to the shutter speed indicator. Press the shutter F2.8 button fully down. NR2'' r Capturing Then the screen turns black. r Processing Finally, when "Processing" disappears, the image has been recorded. • To eliminate the effects of vibration, use of a tripod is recommended. • When a slow shutter speed is set, the processing may take some time. This is because the camera works to remove noise during the time set by the shutter speed setting. 55 Advanced still image shooting