Sony DSC F828 Operating Instructions - Page 94

When [USB Connect] is not set to [PictBridge] in the SET UP settings You cannot use the PictBridge function, even when you turn on the camera. Set [USB Connect] to [PictBridge]. 1 Press MENU and select [USB Connect], then press the center of the multiselector. 2 Select [PictBridge] with v , then press the center. USB Connect PictBridge PTP Normal 94 Printing images You can select an image and print it. Set up the camera following the procedure on page 93, and then connect the printer. / Multi-selector (v/V/b/B) MENU /CF switch • You cannot print movies and images recorded in RAW mode. • When printing E-mail mode images or uncompressed (TIFF) images, only their corresponding JPEG files are printed. • If an error message is sent from the connected printer during the connection, flashes for about five seconds. In such cases, check the printer. • Note that printing may be canceled if you switch the /CF switch while printing images. On the single screen a Select the recording medium with the /CF switch and display the image you want to print with b/B. b Press MENU. The menu appears. c Select (Print) with b/B, then press the center of the multiselector. d Select [This image] with v/V, then press the center of the multi-selector. The Print screen appears. 8M 101 2/9 Print Index Off Date Off Quantity 1 Exit OK • When using a printer that is not compliant with an index print or a date-insert function, unavailable items are not displayed. e Select [Quantity] with v/V, select the number of images with b/B. You can select the number up to 20.