Sony RDR-VX525 Operating Instructions - Page 26

Checking the cable box/satellite receiver control setting 1 Turn on the recorder and the cable box/ satellite receiver. 2 Point the recorder's remote at the recorder (not at the cable box/satellite receiver). 3 Press CH +/- and check that the channel changes on the cable box/satellite receiver window. 4 Press the number buttons and check that the channel changes on the cable box/ satellite receiver window. If you cannot get the recorder to control your cable box/satellite receiver Check the settings at "Set Top Box Control" in "Features" setup (page 101). Check the connection and place the set top box controller near the cable box/satellite receiver (page 12). If your cable box or satellite receiver still does not operate with this recorder, contact your cable or satellite company to see if they can provide you with a compatible cable box or satellite receiver. To fix the set top box controller to your cable box/satellite receiver Once you have confirmed that the set top box controller controls your cable box or satellite receiver, affix it in place. 1 Attach the supplied double-sided tape to the set top box controller. Remove the backings on the double-sided tape. 2 Affix it so that the set top box controller is near the remote control sensor on your cable box/satellite receiver. 26