Sony RDR-VX525 Operating Instructions - Page 76
VCR Recording From Connected Equipment Without the Timer, Turn on the recorder and the connected - remote for
UPC - 027242716056
View all Sony RDR-VX525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
VCR Recording From Connected Equipment Without the Timer You can record TV programs on the recorder through the connected cable box/satellite receiver. DVD 123 456 789 0 VIDEO CH +/- INPUT DISPLAY z REC H PLAY x STOP X PAUSE REC MODE 1 Turn on the recorder and the connected cable box/satellite receiver. 2 Press VIDEO to operate the VCR. 3 Insert a tape with its safety tab in place. 4 Press CH +/- or INPUT repeatedly to select the channel or input source you want to record. • When using the cable box/satellite receiver control, select the channel by pressing CH +/- on this recorder's remote. The recorder's input is switched to the connected input (LINE1 or LINE2). You can also use the number buttons. • When not using the cable box/satellite receiver control, select the connected input 76 (LINE1 or LINE2) by pressing INPUT, and then select the channel on the cable box/ satellite receiver's side. 5 Press REC MODE repeatedly to select the recording mode, "SP" or "EP." For details about the recording mode, see page 75. 6 Press z REC. "REC" appears in the front panel display, and recording starts. Leave the cable box/satellite receiver turned on and do not change the channel you are recording. To stop recording Press x STOP. To pause recording Press X PAUSE. To restart recording, press X PAUSE again. If you pause recording for more than five minutes, recording stops automatically. To watch a DVD while recording Press DVD to operate the DVD recorder, insert a disc, and press H PLAY. z Hints • Tape information displayed on the TV screen will not be recorded on the tape. • You can turn off the TV during recording. Notes • You cannot change the recording mode or input source while recording. • If you insert a tape with its safety tab removed, the tape is ejected when you press z REC. Recording using the Quick Timer (One-touch Timer Recording) You can set the recorder to record in 30-minute increments. 1 Press VIDEO to operate the VCR. 2 Press z REC repeatedly to set the duration. Each press increases the time by 30 minutes, up to six hours. 0:30 1:00 5:30 6:00 (Normal recording)