TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 111

12.2 no mac address-table dynamic Description The no mac address-table dynamic command is used to delete the specified dynamic MAC address, or dynamic MAC addresses based on the VLAN or the port. Syntax no mac address-table dynamic { mac-addr | vid vid | interface {fastEthernet port | gigabitEthernet port | ten-gigabitEthernet port } } Parameter mac-addr --The MAC address you desire to delete. vid --The VLAN ID on which you desire to delete MAC addresses. port --The Ethernet port on which you desire to delete MAC addresses. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Delete the MAC addresses on VLAN 1: Switch(config)# no mac address-table dynamic vid 1 12.3 mac address-table aging-time Description The mac address-table aging-time command is used to configure aging time for the dynamic address. To return to the default configuration, please use no mac address-table aging-time command. Syntax mac address-table aging-time aging-time no mac address-table aging-time Parameter aging-time -- The aging time for the dynamic address. The value of it can be 0 or ranges from 10 to 630 seconds. When 0 is entered, the Auto Aging function is disabled. It is 300 by default. 90