TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 456

Syntax power inline profile name no power inline profile Parameter name -- The name of the PoE profile to be bound to the port. If the name being assigned contains spaces then put it inside double quotes. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement None. Example Bind the PoE profile named "IP Camera" to port 2: Switch(config)# interface gigabitEthernet 1/0/2 Switch(config-if)# power inline profile "IP Camera" 50.7 power inline time-range Description The power inline time-range command is used to bind a PoE time-range to the corresponding port. To cancel the bind relation, please use no power inline time-range command. Syntax power inline time-range name no power inline time-range Parameter name -- The name of the PoE time-range to be bound to the port. Command Mode Interface Configuration Mode Privilege Requirement None. Example Bind the PoE time-range named "tRange2" to port 2: 435