TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 344

36.19 enable authentication (ssh) Description The enable authentication command is used to apply the privilege authentication method list to the ssh terminal line. To restore to the default authentication method list, please use the no enable authentication command. Syntax enable authentication { method-list } no enable authentication Parameter method-list -- Specify the enable method list on the ssh terminal line. It is "default" by default, which contains the method "none". Command Mode Line Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Configure the enable authentication method list on the ssh terminal line as "list2": Switch(config)# line ssh Switch(config-line)# enable authentication list2 36.20 ip http login authentication Description The ip http login authentication command is used to apply the login authentication method list to users accessing through HTTP. To restore to the default authentication method list, please use the no ip http login authentication command. Syntax ip http login authentication { method-list } 323