TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 308

32.5 user access-control port-based enable Description The user access-control port-based enable command is used to configure the access control mode Port-based. To disable the access control feature, please use no user access-control command. Syntax user access-control port-based enable no user access-control Command Mode Global Configuration Mode Privilege Requirement Only Admin and Operator level users have access to these commands. Example Configure the access control mode as Port-based: Switch(config)# user access-control port-based enable 32.6 user access-control port-based Description The user access-control port-based command is used to limit the ports for login. Only the users connected to these ports you set here are allowed to login. You can add up to 30 port-based control entries. To delete the port-based access control entry, please use no user access-control port-based command. Syntax user access-control port-based interface { gigabitEthernet port-list } [ snmp ] [ telnet ] [ ssh ] [ http ] [ https ] [ ping ] [ all ] no user access-control port-based index id Parameter port-list --The list group of Ethernet ports, in the format of 1/0/1-4. You can appoint 5 ports at most. 287