TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 387

Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Bind an ACL entry with the IP 192.168.0.1, MAC 00:00:00:00:00:01, VLAN ID 2 and the Port number 5 manually. And then enable the entry for the ARP detection: Switch(config)#ip source binding host1 192.168.0.1 00:00:00:00:00:01 vlan 2 interface gigabitEthernet 1/0/5 arp-detection Delete the IP-MAC-VID-PORT entry with the index 5: Switch(config)#no ip source binding index 5 41.2 ip dhcp snooping Description The ip dhcp snooping command is used to enable DHCP Snooping function globally. To disable DHCP Snooping function globally, please use no ip dhcp snooping command. DHCP Snooping functions to monitor the process of the Host obtaining the IP address from DHCP server, and record the IP address, MAC address, VLAN and the connected Port number of the Host for automatic binding. Syntax ip dhcp snooping no ip dhcp snooping Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable the DHCP Snooping function globally: Switch(config)#ip dhcp snooping 366