TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 322

Parameter port -- Set the port number. It ranges from 1 to 65535. The default value is 22. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the SSH port number as 22: Switch(config)# ip ssh port 22 34.3 ip ssh version Description The ip ssh version command is used to enable the SSH protocol version. To disable the protocol version, please use no ip ssh version command. Syntax ip ssh version { v1 | v2 } no ip ssh version { v1 | v2 } Parameter v1 | v2 -- The SSH protocol version to be enabled. They represent SSH v1 and SSH v2 respectively. Command Mode Global Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Enable SSH v2: Switch(config)# ip ssh version v2 301