TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 189

please use no instance command. When an instance is disabled, the related mapping VLANs will be removed. Syntax instance instance-id vlan vlan-id no instance instance-id [ vlan vlan-id ] Parameters instance-id -- Instance ID, ranging from 1 to 8. vlan-id -- The VLAN ID selected to mapping with the corresponding instance. Command Mode MST Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Map the VLANs 1-100 to Instance 1: Switch(config)# spanning-tree mst configuration Switch(config-mst)# instance 1 vlan 1-100 Disable Instance 1, namely remove all the mapping VLANs 1-100: Switch(config)# spanning-tree mst configuration Switch(config-mst)# no instance 1 Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1: Switch(config)# spanning-tree mst configuration Switch(config-mst)# no instance 1 vlan 1-50 20.8 name Description The name command is used to configure the region name of MST instance. Syntax name name 168