TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 454

Syntax power inline consumption { power-limit | auto | class1 | class2 | class3 | class4 } Parameter power-limit -- The max power the port in the profile can supply, with five options: "power-limit", "auto", "class1", "class2", "class3" and "class4". "Power-limit" indicates you can manually enter a value ranging from 1 to 300. The value is in the unit of 0.1 watt. For instance, if you want to configure the max power as 5w, you should enter 50. "Auto" indicates the value is assigned automatically by the PoE switch. "Class1" represents 4w. "Class2" represents 7w. "Class3" represents 15.4w. "Class4" represents 30w. Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range gigabitEthernet) Privilege Requirement None. Example Configure the power limit as "5w" for port 2: Switch(config)# interface gigabitEthernet 1/0/2 Switch(config-if)# power inline consumption 50 50.4 power inline priority Description The power inline priority command is used to configure the PoE priority for the corresponding port Syntax power inline priority { low | middle | high } Parameter priority -- The PoE priority of the port. The priority levels include "high", "middle" and "low" in descending order. When the supply power exceeds the system power limit, the PD linked to the port with lower priority will be disconnected. By default, the priority level is "low". Command Mode Interface Configuration Mode (interface gigabitEthernet / interface range 433