TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 27

3. Type in the login username and password (both admin by default). Press Enter and you will enter User EXEC Mode. Figure 1-2 Log in the Switch Note: The first time you log in, change the password to better protect your network and devices. 4. Type in enable command and you will enter Privileged EXEC Mode. By default, no password is needed. Later you can set a password for users who want to access the Privileged EXEC Mode. Figure 1-3 Enter into Priviledged EXEC Mode 1.1.2 Logon by SSH To log on by SSH, a Putty client software is recommended. There are two authentication modes to set up an SSH connection: Password Authentication Mode: It requires username and password, which are both admin by default. Key Authentication Mode: It requires a public key for the switch and a private key for the SSH client software. You can generate the public key and the private key through Putty Key Generator. 6