TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 202

Privilege Requirement None. Example Display the protect information of all ports: Switch(config)# show spanning-tree interface-security Display the protect information of port 1: Switch(config)# show spanning-tree interface-security gigabitEthernet 1/0/1 Display the interface security bpdufilter information: Switch(config)# show spanning-tree interface-security bpdufilter 20.27 show spanning-tree mst Description The show spanning-tree mst command is used to display the related information of MST Instance. Syntax show spanning-tree mst { configuration [ digest ] | instance instance-id [ interface [ gigabitEthernet port | port-channel port-channel-id ] ] } Parameter instance-id -- Instance ID desired to show, ranging from 1 to 8. port -- The Ethernet port number. port-channel-id -- The ID of the port channel. Command Mode Privileged EXEC Mode and Any Configuration Mode Privilege Requirement None. Example Display the region information and mapping information of VLAN and MST Instance: Switch(config)#show spanning-tree mst configuration Display the related information of MST Instance 1: Switch(config)#show spanning-tree mst instance 1 181