TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 152

Command Mode Profile Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure the filtering mode of profile 1 as permit: Switch(config)# ip igmp profile 1 Switch(config-igmp-profile)#permit 17.18 range Description The range command is used to configure the range of the profile's filtering multicast address. To delete the corresponding filtering multicast address, please use no range command. A profile contains 16 filtering IP-range entries at most. Syntax range start-ip end-ip no range start-ip end-ip Parameter start-ip -- The start filtering multicast IP address. end-ip -- The end filtering multicast IP address. Command Mode Profile Configuration Mode Privilege Requirement Only Admin, Operator and Power User level users have access to these commands. Example Configure one of the filter multicast address entry as range 225.1.1.1 to 226.3.2.1 in profile 1: Switch(config)# ip igmp profile 1 Switch(config-igmp-profile)#range 225.1.1.1 226.3.2.1 131