TP-Link T1600G-18TS T1600G-18TSUN V2 CLI Reference Guide Guide - Page 38

Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. Example Enable the global encryption function: Switch(config)# service password-encryption 2.3 enable password Description The enable password command is used to set or change the password for users to access Privileged EXEC Mode from User EXEC Mode. To remove the password, please use no enable password command. This command uses the symmetric encryption. Syntax enable password { [ 0 ] password | 7 encrypted-password } no enable password Parameter 0 -- Specify the encryption type. 0 indicates that an unencrypted password will follow. By default, the encryption type is 0. password -- A string with 31 characters at most, which can contain only English letters (case-sensitive), digits and 17 kinds of special characters. The special characters are By default, it is empty. 7 -- Indicates a symmetric encrypted password with fixed length will follow. encrypted-password -- A symmetric encrypted password with fixed length, which you can copy from another switch's configuration file. After the encrypted password is configured, you should use the corresponding unencrypted password if you re-enter this mode. Command Mode Global Configuration Mode Privilege Requirement Only Admin level users have access to these commands. 17